Maintenance here is not a calendar copied from a manual. The well is the variable, and the routine exists to measure it: what the water leaves in the tank, what the filter catches, and what the dust does to the air path.
The annual core
Drain and look. Open the drain valve into a bucket at the end of the year. Grit, flakes and a slow stream are the three things to notice, and all three say the interval should shorten. A steady stream of clear water argues for keeping the present interval.
Check the anode. Remove it, inspect it, replace it if it is substantially consumed. This is the single cheapest thing that extends the life of a tank on well water, and it takes minutes while the system is drained.
Change the filter element. If a sediment filter sits ahead of the heater, its loading rate is the most honest sediment measurement on the property. Note the date and the appearance each time; the pattern matters more than any single change.
Exercise the relief valve. Lift the lever, confirm it discharges and reseats. A valve that weeps afterwards was already failing, and better to learn that in a planned visit than during a leak.
Check the expansion tank. Where one is fitted, confirm the charge and that it is not waterlogged. A failed expansion tank is silent until the relief valve starts passing water on every heating cycle, which the repair page covers.
Clear the air path. Burner intake, air shutter, vent screen and termination. After the windy weeks is the natural time, and on a west-side parcel that can mean twice in spring.
Reading the seasons
| When | What to do | Why |
|---|---|---|
| Late winter | Check the exposed run and any exterior pipe | Cold nights and frost |
| Spring, after the wind | Clear the intake and the vent screen | Fine soil packs the air path |
| Early summer | Drain sample and flush | Sediment has had a year to settle |
| Mid summer | Watch recovery time | Scale shows up as slower hot water |
| Autumn | Relief valve and expansion check | Closed system under load |
| Before first frost | Insulate and confirm the discharge route | Freeze damage is expensive |
What the record is for
Keep one sheet with the equipment: the last water test, the model and serial, the expansion tank's charge, the filter part number, the dates of each flush and the permit number from the installation.
On a community where the next technician may arrive with no history and the parts come from two towns away, that sheet saves a diagnostic visit. It also makes a warranty conversation possible, because a dated maintenance record is evidence and a memory is not.
When maintenance stops being the answer
A tank that weeps at a seam, a drain that will not seal after flushing, or recovery that stays slow after a proper flush and descale has reached the end of its maintenance life. The replacement page covers how the old unit's condition becomes the specification for the next one.
For a property with several buildings, one record covering all the units is worth more than several partial ones, which the commercial page explains.