An emergency with a water heater is usually one of two things: water escaping where it should not, or a unit that has failed when hot water was not optional. The first is a property problem that needs the water stopped before anything else; the second is an inconvenience that becomes urgent depending on who is in the building.
Stop the water first
If water is running from the tank, the pan or a connection, the priority is the supply, not the diagnosis.
- Close the water shut-off on the cold inlet above the unit. If it is seized or missing, close the house main.
- Cut the heat source. For an electric unit, switch the breaker off. For a gas unit, turn the control to off or set the pilot to off. Heating an empty or draining tank damages it.
- Protect the floor. Move anything that water will ruin, and put towels or a wet-vac where the water is heading. If the water is near electrical outlets or a panel, stay clear and call an electrician as well.
- Call. Describe where the water is coming from and how fast.
A tank shell or seam leak will not stop when the valve is closed if water continues to drain from the tank itself, but closing the inlet limits the supply and keeps the leak from getting worse.
What is genuinely urgent
- An active leak from the tank, a fitting or the relief valve discharge, especially near flooring, a ceiling below or electrical equipment.
- A gas smell or a burner that will not stay lit with a smell present — a gas utility call, not a plumbing call.
- No hot water in a business that cannot trade without it, such as a restaurant or a laundry.
- A unit that is tripping the breaker or has scorched wiring, which needs the power left off.
- Water at a temperature that scalds, particularly where children or older residents are in the building.
What is often not an emergency: a noisy tank that still produces hot water, a slow drip at a drain valve, a unit that is merely old, or a tankless unit showing reduced flow. Those should be seen, but they can be scheduled.
What to have ready
The call goes faster with five facts: whether the unit is gas or electric, whether it is a tank or tankless, roughly how old it is, where the water is coming from, and whether the water is off. If the rating plate is visible, a photo of it helps — it carries the model and serial number.
It also helps to know where the shut-off is before there is a problem. If you cannot find it, that is worth fixing on a calm afternoon rather than during a leak.
Safety boundaries
Some of this work is not a homeowner task, and an emergency is the worst time to discover that. Do not open a gas line, do not attempt to relight a unit that has been flooded, do not reset a breaker repeatedly on a unit that trips it, and do not work on an electrical connection while the circuit is live. If the unit is in a closet with standing water, keep out of the water.
Carbon monoxide is the other boundary. A gas water heater in a sealed closet, a blocked flue or a back-drafting unit can produce it, and the symptoms — headache, nausea, drowsiness in the home — are not something to troubleshoot over the phone. Get out, ventilate, and call the gas utility or emergency services.
After the emergency
Once the water is stopped and the unit is assessed, the outcome is usually one of three: a repair to a failed part, a replacement where the tank has failed, or a correction to a system problem such as missing expansion capacity or a blocked relief valve discharge. The repair and replacement pages explain where each applies, and the maintenance page covers the work that reduces the chance of a repeat.