A replacement here is a swap plus a winterisation. The tank comes out, another goes in, and the pipes around it get the protection the old installation probably never had. Skipping the second half means the next failure is a split line rather than a rusted shell.
What the old unit reports
Read it before it leaves. Sediment depth at the drain says how much the mutual's water has been depositing; scale on the flue or the element says how hard the supply has been running; the anode says how much protection is left in the steel.
Where the property is outside the mutual and on a well, the same evidence reads differently: iron and grit rather than sediment alone, and a check valve that has been closing the system without an expansion tank.
The freeze work belongs in the same visit
The list is short and it is all about January. Insulate every exposed run, re-route anything that crosses an unheated space unprotected, fit isolation valves so an outbuilding can be drained, and check the condensate route on a high-efficiency unit.
None of it is glamorous, and all of it is cheaper now than after a hard freeze. The repair page shows what the alternative looks like.
Choose the unit for the site
Capacity comes from the coldest inlet and the simultaneous fixtures. The location comes from whether the space stays above freezing. Fuel comes from whether the property has piped gas or a propane tank, which changes the venting review and the shutoff location.
A larger tank helps when the inlet is cold and demand is peaky; it does not help an unheated outbuilding stay above zero. Placement outranks capacity as a decision here.
File it with the county
There is no city hall for this address: the application goes to Los Angeles County Public Works, Building and Safety Division, and the inspection is booked through EPIC-LA. Filing while the unit is on order is the sensible order, and describing a relocation or a vent change accurately is what avoids a correction later.
The day of the work
Delivery is the part that surprises people. Units come from Lancaster or Palmdale, and a sloped lot with steps or a narrow path turns a two-person lift into a carry. Confirming the stopping point, the path and the distance beforehand is what keeps the day to a day.
The old tank leaves on the same visit. Draining it first, on a slope, needs a hose route that does not soak a foundation or run into a neighbour's yard, which is worth a look before the valve is opened.
Commission and record
Fill, purge, confirm every renewed joint, check the relief discharge and verify draft. Then leave the record: water test or supplier report, model and serial, expansion tank charge, permit number and the freeze measures taken.
On a community where the next technician may arrive with no history and the nearest counter is down in the valley, that sheet is the most useful thing in the house. For a first installation rather than a swap, the installation page sets the order.