The first decision on a Del Sur installation is not the tank. It is which office inspects the work, because an application filed with the wrong authority costs a week and sometimes a second inspection fee.
Confirm the authority from the parcel
Del Sur is unincorporated Los Angeles County inside Lancaster's sphere of influence. Its addresses carry a Lancaster ZIP code, its school carries a Lancaster address, and the land is still county territory. The permit therefore comes from Los Angeles County Public Works, Building and Safety Division, filed and inspected through EPIC-LA.
A parcel record or the county's own address lookup settles it in a minute. Doing that first is cheaper than discovering it when the inspector does not arrive.
Test the water before choosing the equipment
There is no district supply to characterise, so the property's own test is the specification. Iron, manganese, hardness and sediment decide three things at once: whether a sediment filter goes ahead of the heater, whether a tankless unit is realistic given the inlet screen, and how frequently the tank will need flushing.
The test also gives the customer a baseline. When a future fault appears, "the water was this in November" is a diagnostic, and without it every later complaint starts from nothing.
Plan for expansion, because the system is closed
A well system holds pressure behind a check valve. Heated water expands against that closure and has to go somewhere, so an expansion tank is part of the installation rather than an optional extra. Omitting it turns the relief valve into the expansion device, and the repair page explains how that misdiagnosis repeats.
Where a pressure-reducing valve or a backflow device closes the system instead of a well check valve, the same logic applies. The question to ask is simply whether the plumbing is open to the main, and on this community it usually is not.
Size against the well, not the label
A household's peak demand is set by its fixtures; the supply is set by the pump, the pressure tank and the well's recovery. Where recovery is slow, storage volume does the work a bigger burner cannot, and a tank sized to the morning routine beats a unit rated for a flow the well will not sustain.
Tankless is a separate decision with its own arithmetic, covered on the tankless page: the unit needs flow at pressure, and the inlet screen needs protection from grit.
Clear the vent and the air
The flue route is decided before the unit is bought, because a replacement that changes the vent path changes the permit scope and sometimes the location. On a parcel where wind carries fine soil, the termination's exposure matters as much as its height: an intake facing the prevailing wind invites a downdraft and a screen that packs solid.
Where the unit sits in a closet or a garage, combustion air is designed rather than assumed, and the garage clearance rule for a gas unit is checked against the actual floor level.
Deliver and set it
Units come from Lancaster or Palmdale. Confirm the access before the delivery day: the gate, the drive, the surface and whether a loaded vehicle can reach the install point. A tank carried a hundred yards across a yard is a different job from one set beside a door.
Commission and record
Fill, purge, check every renewed joint, confirm the relief discharge route and verify draft. Leave the water test, the model details and the permit record with the equipment. On a property where the next technician may arrive without any history, that folder is the difference between a diagnosis and a rediscovery.
For a replacement rather than a new installation, the replacement page covers what to read off the old unit before it goes.